SPEC.NO. (01-07-09)93003599
Assembly & Installation Instructions
Read instructions carefully and turn electricity off at main
circuit breaker panel before beginning installation.
2620
CAUTION:
PAGE of
1 2
***************************************************************************************************************************************************************
***************************************************************************************************************************************************************
1
5
8
2
4
3
9
7
10
12
6
11
1.- Remove the Switch Housing Cover (1) by removing the three Mounting Screws (2).
2.- Remove the Center Plug from the Switch Housing Cover (1).
3.- Remove the Hexnut (3) and Lockwasher (4) from the Stem (5) of the Light Kit Fitter (6).
4.- Insert the Light Kit Wires (7) thru the center hole of the Switch Housing Cover (1) and thread Cover onto the top of the
Light Kit Fitter (6). Replace Lockwasher (4) and Hexnut (3) onto Stem (5) to secure in place.
5.- Carefully pull down Blue and White Wires from the Switch Housing (8) (labeled "For Light Kit Connection"). Connect Light
Kit Wires (7) to Switch Housing Wires (9) (Black to Blue and White to White) by connecting male to female Quick Connects
(10). Take care to align tabs for secure fit.
6.- Align the screw holes of the Switch Housing Cover (1) with the screw holes of the Switch Housing (8) and secure with the
three Screws (2) removed in step 1.
7.-
Install Lamp (13).
8.-
Net Weight of the light fixture: 2.42 Lbs. (1.1 kgs.)
13
1, 2, 8 & 9
(NOT FURNISHED)
(NO INCLUIDA)
(NON FOURNIE)
To reduce the risk of fire and electric shock, this light
kit should be used only with ceiling fan models:
P2501(52-ANT),P2503(52-RDT), manufactured by
Chien Luen Industries (Zhongshan) Ltd.
Insert Glass Shade (11) into Fitter (6) and secure in
place with the three Thumbscrews (12).
All glass is fragile, use care when handling
Glass Shade (11) and lamp.
WARNING - As required by Congress, this fixture contains a device to limit lighting power consumption to 190 watts
or less. If the wattage of installed bulbs exceeds 190 watts, the light fixture will not operate. To reset the
limiter (1) turn off power using the pull switch or wall switch, (2) reduce the total wattage of installed bulbs to
less than 190 watts and (3) restore power to resume normal operation.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects and /or other
reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this product.
NOTE: This fixture comes with replaceable ballast. Should the ballast fail; contact a qualified electrician to replace
it. If further assistance is required, contact: Consumer Products Technical Support at: (864) 678-1670.
WARNING: If any Special Control Devices are used with this Fixture, Follow the Instructions Carefully to assure full
compliance with N.E.C. requirements. If there are any questions, contact a Qualified Electrical Contractor.
CAUTION -
CAUTION -
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels